The “brains” behind the “brawn” of our generators, Generac Industrial Power offers several lines of power transfer switches. All of our transfer switches are available in contactor type which are double-throw and interlocked with an over center design to ensure safe, positive transfer between power sources.
Our GTS/HTS lines are ideal for light industrial applications with amps up to 2,600. Our HTS line works with our PowerManager® controllers which can be set remotely via GenLink® communications software providing you with a single source for you genset needs.
The PSTS models provide up to 5,000 amps and feature open, delayed, and closed transitions on three cycle switches which are essential in mission critical and other industrial applications. All service entrance switches are 100 percent rated, and the top, bottom, and side cable entry eases installation. Our PSTS switches can also be integrated with our ATC-900 or ATC-300+ controllers or with virtually any other controller.
Generac offers a full line of Industrial Transfer Switches to meet varying needs from light industrial applications all the way to the most demanding critical installations. All Generac switches offer contacts that are silver composite which resists pitting or burning, ultimately leading to longer life and the reliability you expect. These switches are ISO 9000 certified, meet all relevant NEC codes, and are rated for full load transfers in critical operating, emergency, legally required, and optional power systems. Generac’s flexible platforms offer a variety of switching technologies for customized solutions to meet any project needs.
Generac Power Systems offers a full line of controllers to fit your every need. From our standard GTS/HTS series to our more advanced ATC-300+ controller and all the way to our top of the line controller, the ATC-900.